Free mustache SVG

Goatee with a mustache SVG

Goatee with a mustache, as a solid black shape
Goatee with a mustache. The preview is the SVG file itself.

A moustache that runs down both sides of the mouth and joins a tuft on the chin, leaving the cheeks bare. The mouth is one wide opening in the middle.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size91 × 100 mm (3.57 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length442 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes33 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,823 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)Over 1.5 mm112 mm110Vinyl, card and thin sheet
1.82 × 2 in (46 × 51 mm)Over 3 mm225 mm30Any material, including 3 mm wood and acrylic
2.72 × 3 in (69 × 76 mm)Over 4.6 mm337 mm12Any material, including 3 mm wood and acrylic
3.63 × 4 in (92 × 102 mm)Over 6.1 mm449 mm6Any material, including 3 mm wood and acrylic
5.45 × 6 in (138 × 152 mm)Over 9.1 mm674 mm2Any material, including 3 mm wood and acrylic
7.26 × 8 in (185 × 203 mm)Over 12 mm898 mm1Any material, including 3 mm wood and acrylic
10.9 × 12 in (277 × 305 mm)Over 18 mm1,347 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mustache SVG files

← Long beard and mustache silhouette All 18 mustaches Mustache on a stick →