Free monkey SVG

Monkey hanging by its tail SVG

Monkey hanging by its tail, as a solid black shape — Monkey hanging by its tail. The preview is the SVG file itself.

A monkey upside down, hanging from a branch by its tail with both arms flung out. One for the top edge of a card, a shelf or a door frame.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	1,042 mm at this size
Narrowest part	1.8 mm at this size
Nodes	389 curve and line segments

Measured from the file. PNG: 1,740 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.46 mm	265 mm	110	Too fine for most machines
1.73 × 2 in (44 × 51 mm)	0.91 mm	529 mm	30	Fine detail: vinyl and paper only, weed with care
2.6 × 3 in (66 × 76 mm)	1.4 mm	794 mm	12	Vinyl, card and thin sheet
3.46 × 4 in (88 × 102 mm)	1.8 mm	1,059 mm	6	Vinyl, card and thin sheet
5.19 × 6 in (132 × 152 mm)	2.7 mm	1,588 mm	2	Vinyl, card and thin sheet
6.92 × 8 in (176 × 203 mm)	3.7 mm	2,117 mm	1	Any material, including 3 mm wood and acrylic
10.38 × 12 in (264 × 305 mm)	5.5 mm	3,176 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monkey SVG files

← Monkey hanging from a branch All 13 monkeys Two monkeys on a branch →