Free monkey SVG

Two monkeys on a branch SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Two monkeys on a branch, as a solid black shape
Two monkeys on a branch. The preview is the SVG file itself.

Two monkeys hanging side by side from one branch, each by its outside arm, holding hands in the middle. Their faces are kept simple so they cut cleanly at this size, and the pair is one piece.

What is in the file

Size100 × 79 mm (3.94 × 3.11 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut18: 1 outer edge and 17 cut-outs
Cut length1,152 mm at this size
Narrowest part1.3 mm at this size
Nodes417 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,598 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.33 mm293 mm120Too fine for most machines
2 × 1.58 in (51 × 40 mm)0.66 mm585 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.37 in (76 × 60 mm)0.99 mm878 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.16 in (102 × 80 mm)1.3 mm1,170 mm6Vinyl, card and thin sheet
6 × 4.75 in (152 × 121 mm)2 mm1,756 mm2Vinyl, card and thin sheet
8 × 6.33 in (203 × 161 mm)2.6 mm2,341 mm1Vinyl, card and thin sheet
12 × 9.49 in (305 × 241 mm)4 mm3,511 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monkey SVG files

← Monkey hanging by its tail All 13 monkeys Monkey silhouette on a branch →