Free monkey SVG

Peeking monkey SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peeking monkey, as a solid black shape
Peeking monkey. The preview is the SVG file itself.

The top half of a monkey face looking over a ledge, with a tuft of hair and four fingers of each hand hooked over the edge. Sit it on the top of a pocket, a photo or a sign.

What is in the file

Size100 × 50 mm (3.94 × 1.97 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length693 mm at this size
Narrowest part1.4 mm at this size
Nodes216 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,038 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.36 mm176 mm170Too fine for most machines
2 × 1 in (51 × 25 mm)0.71 mm352 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.5 in (76 × 38 mm)1.1 mm528 mm21Vinyl, card and thin sheet
4 × 2 in (102 × 51 mm)1.4 mm704 mm10Vinyl, card and thin sheet
6 × 3 in (152 × 76 mm)2.1 mm1,056 mm3Vinyl, card and thin sheet
8 × 4 in (203 × 102 mm)2.8 mm1,408 mm2Vinyl, card and thin sheet
12 × 6 in (305 × 152 mm)4.3 mm2,112 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monkey SVG files

← Walking monkey All 13 monkeys Swinging monkey silhouette →