Free monkey SVG

Monkey hanging from a branch SVG

Monkey hanging from a branch, as a solid black shape — Monkey hanging from a branch. The preview is the SVG file itself.

A monkey dangling from a leafy branch by one long arm and waving with the other, tail curled. The branch runs the full width, which makes it easy to hang or to weld to a name.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	1,086 mm at this size
Narrowest part	1.8 mm at this size
Nodes	362 curve and line segments

Measured from the file. PNG: 1,742 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.46 mm	276 mm	110	Too fine for most machines
1.73 × 2 in (44 × 51 mm)	0.91 mm	552 mm	30	Fine detail: vinyl and paper only, weed with care
2.6 × 3 in (66 × 76 mm)	1.4 mm	828 mm	12	Vinyl, card and thin sheet
3.46 × 4 in (88 × 102 mm)	1.8 mm	1,103 mm	6	Vinyl, card and thin sheet
5.2 × 6 in (132 × 152 mm)	2.7 mm	1,655 mm	2	Vinyl, card and thin sheet
6.93 × 8 in (176 × 203 mm)	3.7 mm	2,207 mm	1	Any material, including 3 mm wood and acrylic
10.39 × 12 in (264 × 305 mm)	5.5 mm	3,310 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monkey SVG files

← Monkey holding a banana All 13 monkeys Monkey hanging by its tail →