Free monkey SVG

Walking monkey SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Walking monkey, as a solid black shape
Walking monkey. The preview is the SVG file itself.

A monkey on all fours in profile with its long tail arched over its back in a curl, and an ear, an eye and a mouth cut in. Line up a few for a jungle border.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 94 mm (3.94 × 3.71 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length775 mm at this size
Narrowest part1.4 mm at this size
Nodes244 curve and line segments

Measured from the file. PNG: 2,000 × 1,890 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.94 in (25 × 24 mm)0.36 mm197 mm100Too fine for most machines
2 × 1.89 in (51 × 48 mm)0.71 mm394 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.83 in (76 × 72 mm)1.1 mm591 mm12Vinyl, card and thin sheet
4 × 3.77 in (102 × 96 mm)1.4 mm787 mm6Vinyl, card and thin sheet
6 × 5.66 in (152 × 144 mm)2.1 mm1,181 mm2Vinyl, card and thin sheet
8 × 7.54 in (203 × 192 mm)2.8 mm1,575 mm1Vinyl, card and thin sheet
12 × 11.32 in (305 × 287 mm)4.3 mm2,362 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monkey SVG files

← Monkey silhouette on a branch All 13 monkeys Peeking monkey →