Free monkey SVG

Swinging monkey silhouette SVG

Swinging monkey silhouette, as a solid black shape — Swinging monkey silhouette. The preview is the SVG file itself.

A monkey hanging from a branch by both hands with its legs kicking and its tail curled below, as a solid shape. Nothing to weed, so it suits small decals and stencils.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	78 × 100 mm (3.08 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	711 mm at this size
Narrowest part	3.2 mm at this size
Nodes	247 curve and line segments

Measured from the file. PNG: 1,583 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.78 × 1 in (20 × 25 mm)	0.81 mm	181 mm	120	Fine detail: vinyl and paper only, weed with care
1.57 × 2 in (40 × 51 mm)	1.6 mm	361 mm	30	Vinyl, card and thin sheet
2.35 × 3 in (60 × 76 mm)	2.4 mm	542 mm	12	Vinyl, card and thin sheet
3.13 × 4 in (80 × 102 mm)	3.3 mm	722 mm	6	Any material, including 3 mm wood and acrylic
4.7 × 6 in (119 × 152 mm)	4.9 mm	1,084 mm	2	Any material, including 3 mm wood and acrylic
6.26 × 8 in (159 × 203 mm)	6.5 mm	1,445 mm	1	Any material, including 3 mm wood and acrylic
9.4 × 12 in (239 × 305 mm)	9.8 mm	2,167 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monkey SVG files

← Peeking monkey All 13 monkeys Monkey face outline →