Free Mamas Boy SVG

Mamas Boy with a drop shadow SVG

Mamas Boy with a drop shadow, in layered colours
Mamas Boy with a drop shadow. The preview is the SVG file itself.

“Mamas Boy” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 86 mm (3.94 × 3.38 in), scales to any size
Pieces5 separate pieces
Outlines to cut15: 5 outer edges and 10 cut-outs
Cut length1,515 mm at this size
Narrowest part4.7 mm at this size
Nodes523 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,729 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.86 in (25 × 22 mm)1.2 mm385 mm110Vinyl, card and thin sheet
2 × 1.72 in (51 × 44 mm)2.4 mm770 mm30Vinyl, card and thin sheet
3 × 2.58 in (76 × 65 mm)3.6 mm1,154 mm12Any material, including 3 mm wood and acrylic
4 × 3.44 in (102 × 87 mm)4.8 mm1,539 mm6Any material, including 3 mm wood and acrylic
6 × 5.15 in (152 × 131 mm)7.2 mm2,309 mm2Any material, including 3 mm wood and acrylic
8 × 6.87 in (203 × 175 mm)9.6 mm3,078 mm1Any material, including 3 mm wood and acrylic
12 × 10.31 in (305 × 262 mm)14 mm4,618 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mamas Boy SVG files

← Mamas Boy stencil plate All 12 Mamas Boy designs Mamas Boy in Pacifico →