Free Mamas Boy SVG

Mamas Boy in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mamas Boy in Alfa Slab One, as a solid black shape
Mamas Boy in Alfa Slab One. The preview is the SVG file itself.

“Mamas Boy” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 56 mm (3.94 × 2.22 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length781 mm at this size
Narrowest part2.2 mm at this size
Nodes203 curve and line segments

Measured from the file. PNG: 2,000 × 1,162 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.56 mm198 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.13 in (51 × 29 mm)1.1 mm397 mm45Vinyl, card and thin sheet
3 × 1.69 in (76 × 43 mm)1.7 mm595 mm18Vinyl, card and thin sheet
4 × 2.26 in (102 × 57 mm)2.2 mm793 mm8Vinyl, card and thin sheet
6 × 3.38 in (152 × 86 mm)3.4 mm1,190 mm3Any material, including 3 mm wood and acrylic
8 × 4.51 in (203 × 115 mm)4.5 mm1,587 mm2Any material, including 3 mm wood and acrylic
12 × 6.77 in (305 × 172 mm)6.7 mm2,380 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mamas Boy SVG files

← Mamas Boy in Lilita One All 13 Mamas Boy designs Mamas Boy in Amatic SC →