Free Mamas Boy SVG

Mamas Boy in script and capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mamas Boy in script and capitals, as a solid black shape
Mamas Boy in script and capitals. The preview is the SVG file itself.

“Mamas” in Pacifico script over “BOY” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

What is in the file

Size100 × 96 mm (3.94 × 3.78 in), scales to any size
Pieces4 separate pieces
Outlines to cut9: 4 outer edges and 5 cut-outs
Cut length1,279 mm at this size
Narrowest part1.8 mm at this size
Nodes228 curve and line segments

Measured from the file. PNG: 2,000 × 1,921 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.46 mm325 mm100Too fine for most machines
2 × 1.92 in (51 × 49 mm)0.91 mm650 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.88 in (76 × 73 mm)1.4 mm975 mm9Vinyl, card and thin sheet
4 × 3.84 in (102 × 97 mm)1.8 mm1,299 mm6Vinyl, card and thin sheet
6 × 5.75 in (152 × 146 mm)2.7 mm1,949 mm2Vinyl, card and thin sheet
8 × 7.67 in (203 × 195 mm)3.7 mm2,599 mm1Any material, including 3 mm wood and acrylic
12 × 11.51 in (305 × 292 mm)5.5 mm3,898 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mamas Boy SVG files

← Mamas Boy in block capitals All 13 Mamas Boy designs Mamas Boy with hearts →