Free Mamas Boy SVG

Mamas Boy stencil plate SVG

Mamas Boy stencil plate, as a solid black shape — Mamas Boy stencil plate. The preview is the SVG file itself.

A rounded plate with “MAMAS BOY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 93 mm (3.94 × 3.66 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,532 mm at this size
Narrowest part	1.3 mm at this size
Nodes	245 curve and line segments

Measured from the file. PNG: 2,000 × 1,863 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.93 in (25 × 24 mm)	0.33 mm	389 mm	100	Too fine for most machines
2 × 1.86 in (51 × 47 mm)	0.66 mm	778 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.79 in (76 × 71 mm)	0.99 mm	1,167 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.72 in (102 × 94 mm)	1.3 mm	1,557 mm	6	Vinyl, card and thin sheet
6 × 5.57 in (152 × 142 mm)	2 mm	2,335 mm	2	Vinyl, card and thin sheet
8 × 7.43 in (203 × 189 mm)	2.6 mm	3,113 mm	1	Vinyl, card and thin sheet
12 × 11.15 in (305 × 283 mm)	4 mm	4,670 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mamas Boy SVG files

← Mamas Boy outline lettering All 12 Mamas Boy designs Mamas Boy with a drop shadow →