Free Mamas Boy SVG

Mamas Boy in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mamas Boy in Amatic SC, as a solid black shape
Mamas Boy in Amatic SC. The preview is the SVG file itself.

“Mamas Boy” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size91 × 100 mm (3.6 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length1,286 mm at this size
Narrowest part2.3 mm at this size
Nodes358 curve and line segments

Measured from the file. PNG: 1,835 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)0.58 mm327 mm100Fine detail: vinyl and paper only, weed with care
1.83 × 2 in (46 × 51 mm)1.2 mm653 mm30Vinyl, card and thin sheet
2.74 × 3 in (70 × 76 mm)1.8 mm980 mm12Vinyl, card and thin sheet
3.66 × 4 in (93 × 102 mm)2.3 mm1,307 mm6Vinyl, card and thin sheet
5.48 × 6 in (139 × 152 mm)3.5 mm1,960 mm2Any material, including 3 mm wood and acrylic
7.31 × 8 in (186 × 203 mm)4.7 mm2,613 mm1Any material, including 3 mm wood and acrylic
10.97 × 12 in (279 × 305 mm)7 mm3,920 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mamas Boy SVG files

← Mamas Boy in Alfa Slab One All 13 Mamas Boy designs Mamas Boy in block capitals →