Free Mamas Boy SVG

Mamas Boy in block capitals SVG

Mamas Boy in block capitals, as a solid black shape
Mamas Boy in block capitals. The preview is the SVG file itself.

“MAMAS BOY” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size97 × 100 mm (3.83 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length1,581 mm at this size
Narrowest part3.2 mm at this size
Nodes146 curve and line segments

Measured from the file. PNG: 1,950 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)0.81 mm402 mm100Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (49 × 51 mm)1.6 mm803 mm25Vinyl, card and thin sheet
2.92 × 3 in (74 × 76 mm)2.4 mm1,205 mm9Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)3.3 mm1,606 mm4Any material, including 3 mm wood and acrylic
5.84 × 6 in (148 × 152 mm)4.9 mm2,409 mm2Any material, including 3 mm wood and acrylic
7.79 × 8 in (198 × 203 mm)6.5 mm3,213 mm1Any material, including 3 mm wood and acrylic
11.69 × 12 in (297 × 305 mm)9.8 mm4,819 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mamas Boy SVG files

← Mamas Boy in Amatic SC All 12 Mamas Boy designs Mamas Boy in script and capitals →