Free Mamas Boy SVG

Mamas Boy in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mamas Boy in Lobster, as a solid black shape
Mamas Boy in Lobster. The preview is the SVG file itself.

“Mamas Boy” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 82 mm (3.94 × 3.24 in), scales to any size
Pieces4 separate pieces
Outlines to cut9: 4 outer edges and 5 cut-outs
Cut length993 mm at this size
Narrowest part1.3 mm at this size
Nodes229 curve and line segments

Measured from the file. PNG: 2,000 × 1,660 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.33 mm252 mm110Too fine for most machines
2 × 1.65 in (51 × 42 mm)0.66 mm504 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.47 in (76 × 63 mm)0.99 mm757 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.29 in (102 × 84 mm)1.3 mm1,009 mm6Vinyl, card and thin sheet
6 × 4.94 in (152 × 125 mm)2 mm1,513 mm2Vinyl, card and thin sheet
8 × 6.58 in (203 × 167 mm)2.6 mm2,018 mm1Vinyl, card and thin sheet
12 × 9.88 in (305 × 251 mm)4 mm3,027 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mamas Boy SVG files

← Mamas Boy in Pacifico All 13 Mamas Boy designs Mamas Boy in Kaushan Script →