Free Mamas Boy SVG

Mamas Boy in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mamas Boy in Kaushan Script, as a solid black shape
Mamas Boy in Kaushan Script. The preview is the SVG file itself.

“Mamas Boy” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 75 mm (3.94 × 2.93 in), scales to any size
Pieces8 separate pieces
Outlines to cut12: 8 outer edges and 4 cut-outs
Cut length987 mm at this size
Narrowest part1 mm at this size
Nodes330 curve and line segments

Measured from the file. PNG: 2,000 × 1,510 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.25 mm251 mm120Too fine for most machines
2 × 1.49 in (51 × 38 mm)0.51 mm501 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.24 in (76 × 57 mm)0.76 mm752 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.98 in (102 × 76 mm)1 mm1,003 mm6Vinyl, card and thin sheet
6 × 4.47 in (152 × 114 mm)1.5 mm1,504 mm2Vinyl, card and thin sheet
8 × 5.96 in (203 × 151 mm)2 mm2,006 mm1Vinyl, card and thin sheet
12 × 8.94 in (305 × 227 mm)3 mm3,008 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mamas Boy SVG files

← Mamas Boy in Lobster All 13 Mamas Boy designs Mamas Boy in Lilita One →