Free Mama Claus SVG

Mama Claus in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Claus in Lilita One, as a solid black shape
Mama Claus in Lilita One. The preview is the SVG file itself.

“Mama Claus” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 67 mm (3.94 × 2.65 in), scales to any size
Pieces9 separate pieces
Outlines to cut12: 9 outer edges and 3 cut-outs
Cut length918 mm at this size
Narrowest part3.9 mm at this size
Nodes222 curve and line segments

Measured from the file. PNG: 2,000 × 1,373 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.99 mm233 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.35 in (51 × 34 mm)2 mm466 mm35Vinyl, card and thin sheet
3 × 2.02 in (76 × 51 mm)3 mm700 mm15Vinyl, card and thin sheet
4 × 2.7 in (102 × 68 mm)4 mm933 mm8Any material, including 3 mm wood and acrylic
6 × 4.04 in (152 × 103 mm)5.9 mm1,399 mm2Any material, including 3 mm wood and acrylic
8 × 5.39 in (203 × 137 mm)7.9 mm1,865 mm2Any material, including 3 mm wood and acrylic
12 × 8.09 in (305 × 205 mm)12 mm2,798 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Claus SVG files

← Mama Claus in Kaushan Script All 13 Mama Claus designs Mama Claus in Alfa Slab One →