Free Mama Claus SVG

Mama Claus stencil plate SVG

Mama Claus stencil plate, as a solid black shape — Mama Claus stencil plate. The preview is the SVG file itself.

A rounded plate with “MAMA CLAUS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 79 mm (3.94 × 3.09 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	1,486 mm at this size
Narrowest part	1.6 mm at this size
Nodes	240 curve and line segments

Measured from the file. PNG: 2,000 × 1,587 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.79 in (25 × 20 mm)	0.41 mm	377 mm	120	Too fine for most machines
2 × 1.57 in (51 × 40 mm)	0.81 mm	755 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.36 in (76 × 60 mm)	1.2 mm	1,132 mm	12	Vinyl, card and thin sheet
4 × 3.14 in (102 × 80 mm)	1.6 mm	1,510 mm	6	Vinyl, card and thin sheet
6 × 4.71 in (152 × 120 mm)	2.4 mm	2,265 mm	2	Vinyl, card and thin sheet
8 × 6.28 in (203 × 160 mm)	3.3 mm	3,020 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.42 in (305 × 239 mm)	4.9 mm	4,529 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Claus SVG files

← Mama Claus outline lettering All 12 Mama Claus designs Mama Claus with a drop shadow →