Mama Claus with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Mama Claus” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 84 mm (3.94 × 3.3 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 13: 4 outer edges and 9 cut-outs |
| Cut length | 1,770 mm at this size |
| Narrowest part | 4.1 mm at this size |
| Nodes | 474 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,690 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.84 in (25 × 21 mm) | 1 mm | 450 mm | 110 | Vinyl, card and thin sheet |
| 2 × 1.68 in (51 × 43 mm) | 2.1 mm | 899 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.52 in (76 × 64 mm) | 3.1 mm | 1,349 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.36 in (102 × 85 mm) | 4.2 mm | 1,798 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.03 in (152 × 128 mm) | 6.2 mm | 2,697 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.71 in (203 × 170 mm) | 8.3 mm | 3,597 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.07 in (305 × 256 mm) | 12 mm | 5,395 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Mama Claus SVG files
-
Mama Claus with a Santa hat Solid · 7 pieces
-
Mama Claus in Pacifico Solid · 2 pieces
-
Mama Claus in Lobster Solid · 3 pieces
-
Mama Claus in Kaushan Script Solid · 9 pieces
-
Mama Claus in Lilita One Solid · 9 pieces
-
Mama Claus in Alfa Slab One Solid · 9 pieces
-
Mama Claus in Amatic SC Solid · 9 pieces
-
Mama Claus in block capitals Solid · 9 pieces
← Mama Claus stencil plate All 13 Mama Claus designs Mama Claus with a Santa hat →