Free Mama Claus SVG

Mama Claus in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Claus in Kaushan Script, as a solid black shape
Mama Claus in Kaushan Script. The preview is the SVG file itself.

“Mama Claus” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 76 mm (3.94 × 2.99 in), scales to any size
Pieces9 separate pieces
Outlines to cut10: 9 outer edges and 1 cut-out
Cut length1,121 mm at this size
Narrowest part1.4 mm at this size
Nodes368 curve and line segments

Measured from the file. PNG: 2,000 × 1,538 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.36 mm285 mm120Too fine for most machines
2 × 1.52 in (51 × 39 mm)0.71 mm569 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.28 in (76 × 58 mm)1.1 mm854 mm12Vinyl, card and thin sheet
4 × 3.04 in (102 × 77 mm)1.4 mm1,139 mm6Vinyl, card and thin sheet
6 × 4.56 in (152 × 116 mm)2.1 mm1,708 mm2Vinyl, card and thin sheet
8 × 6.08 in (203 × 154 mm)2.8 mm2,278 mm1Vinyl, card and thin sheet
12 × 9.12 in (305 × 232 mm)4.3 mm3,417 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Claus SVG files

← Mama Claus in Lobster All 13 Mama Claus designs Mama Claus in Lilita One →