Free Mama Claus SVG

Mama Claus with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Claus with stars, as a solid black shape
Mama Claus with stars. The preview is the SVG file itself.

“Mama Claus” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size85 × 100 mm (3.35 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut13: 9 outer edges and 4 cut-outs
Cut length1,144 mm at this size
Narrowest part1.4 mm at this size
Nodes292 curve and line segments

Measured from the file. PNG: 1,712 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.85 × 1 in (22 × 25 mm)0.36 mm291 mm110Too fine for most machines
1.7 × 2 in (43 × 51 mm)0.71 mm581 mm30Fine detail: vinyl and paper only, weed with care
2.55 × 3 in (65 × 76 mm)1.1 mm872 mm12Vinyl, card and thin sheet
3.4 × 4 in (86 × 102 mm)1.4 mm1,162 mm6Vinyl, card and thin sheet
5.1 × 6 in (130 × 152 mm)2.1 mm1,743 mm2Vinyl, card and thin sheet
6.8 × 8 in (173 × 203 mm)2.8 mm2,325 mm1Vinyl, card and thin sheet
10.2 × 12 in (259 × 305 mm)4.3 mm3,487 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Claus SVG files

← Mama Claus in script and capitals All 13 Mama Claus designs Mama Claus outline lettering →