Free Mama Claus SVG

Mama Claus in script and capitals SVG

Mama Claus in script and capitals, as a solid black shape — Mama Claus in script and capitals. The preview is the SVG file itself.

“Mama” in Pacifico script over “CLAUS” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 74 mm (3.94 × 2.91 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	9: 6 outer edges and 3 cut-outs
Cut length	1,276 mm at this size
Narrowest part	2.2 mm at this size
Nodes	228 curve and line segments

Measured from the file. PNG: 2,000 × 1,500 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.74 in (25 × 19 mm)	0.56 mm	324 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.48 in (51 × 38 mm)	1.1 mm	648 mm	35	Vinyl, card and thin sheet
3 × 2.22 in (76 × 56 mm)	1.7 mm	972 mm	15	Vinyl, card and thin sheet
4 × 2.96 in (102 × 75 mm)	2.2 mm	1,296 mm	6	Vinyl, card and thin sheet
6 × 4.44 in (152 × 113 mm)	3.4 mm	1,945 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.92 in (203 × 150 mm)	4.5 mm	2,593 mm	1	Any material, including 3 mm wood and acrylic
12 × 8.88 in (305 × 226 mm)	6.7 mm	3,889 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Claus SVG files

← Mama Claus in block capitals All 12 Mama Claus designs Mama Claus with stars →