Free Mama Claus SVG

Mama Claus in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Claus in Alfa Slab One, as a solid black shape
Mama Claus in Alfa Slab One. The preview is the SVG file itself.

“Mama Claus” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 59 mm (3.94 × 2.33 in), scales to any size
Pieces9 separate pieces
Outlines to cut12: 9 outer edges and 3 cut-outs
Cut length969 mm at this size
Narrowest part2.6 mm at this size
Nodes215 curve and line segments

Measured from the file. PNG: 2,000 × 1,213 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.66 mm246 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.18 in (51 × 30 mm)1.3 mm492 mm40Vinyl, card and thin sheet
3 × 1.77 in (76 × 45 mm)2 mm738 mm18Vinyl, card and thin sheet
4 × 2.36 in (102 × 60 mm)2.6 mm985 mm8Vinyl, card and thin sheet
6 × 3.55 in (152 × 90 mm)4 mm1,477 mm3Any material, including 3 mm wood and acrylic
8 × 4.73 in (203 × 120 mm)5.3 mm1,969 mm2Any material, including 3 mm wood and acrylic
12 × 7.09 in (305 × 180 mm)7.9 mm2,954 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Claus SVG files

← Mama Claus in Lilita One All 13 Mama Claus designs Mama Claus in Amatic SC →