Let It Snow stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “LET IT SNOW” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.16 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 1,340 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 186 curve and line segments |
Measured from the file. PNG: 2,000 × 1,621 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.43 mm | 340 mm | 120 | Too fine for most machines |
| 2 × 1.61 in (51 × 41 mm) | 0.86 mm | 681 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.41 in (76 × 61 mm) | 1.3 mm | 1,021 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.21 in (102 × 82 mm) | 1.7 mm | 1,361 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.82 in (152 × 122 mm) | 2.6 mm | 2,042 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.42 in (203 × 163 mm) | 3.5 mm | 2,723 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.64 in (305 × 245 mm) | 5.2 mm | 4,084 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let It Snow SVG files
-
Let It Snow with a drop shadow Layered · 9 pieces
-
Let It Snow with a snowflake Solid · 8 pieces
-
Let It Snow in Pacifico Solid · 5 pieces
-
Let It Snow in Lobster Solid · 6 pieces
-
Let It Snow in Kaushan Script Solid · 9 pieces
-
Let It Snow in Lilita One Solid · 9 pieces
-
Let It Snow in Alfa Slab One Solid · 9 pieces
-
Let It Snow in Amatic SC Solid · 9 pieces
← Let It Snow outline lettering All 13 Let It Snow designs Let It Snow with a drop shadow →