Let It Snow in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Let It Snow” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 85 mm (3.94 × 3.34 in), scales to any size |
|---|---|
| Pieces | 9 separate pieces |
| Outlines to cut | 11: 9 outer edges and 2 cut-outs |
| Cut length | 1,039 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 319 curve and line segments |
Measured from the file. PNG: 2,000 × 1,710 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.85 in (25 × 22 mm) | 0.33 mm | 264 mm | 110 | Too fine for most machines |
| 2 × 1.7 in (51 × 43 mm) | 0.66 mm | 528 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.55 in (76 × 65 mm) | 0.99 mm | 792 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.4 in (102 × 86 mm) | 1.3 mm | 1,056 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.09 in (152 × 129 mm) | 2 mm | 1,583 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.79 in (203 × 173 mm) | 2.6 mm | 2,111 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.19 in (305 × 259 mm) | 4 mm | 3,167 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let It Snow SVG files
-
Let It Snow in Lilita One Solid · 9 pieces
-
Let It Snow in Alfa Slab One Solid · 9 pieces
-
Let It Snow in Amatic SC Solid · 9 pieces
-
Let It Snow in block capitals Solid · 9 pieces
-
Let It Snow in script and capitals Solid · 7 pieces
-
Let It Snow with stars Solid · 12 pieces
-
Let It Snow outline lettering Outline · 11 pieces
-
Let It Snow stencil plate Solid · one piece
← Let It Snow in Lobster All 13 Let It Snow designs Let It Snow in Lilita One →