Free Let It Snow SVG

Let It Snow in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Let It Snow in Lilita One, as a solid black shape
Let It Snow in Lilita One. The preview is the SVG file itself.

“Let It Snow” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 78 mm (3.94 × 3.07 in), scales to any size
Pieces9 separate pieces
Outlines to cut11: 9 outer edges and 2 cut-outs
Cut length929 mm at this size
Narrowest part4.8 mm at this size
Nodes216 curve and line segments

Measured from the file. PNG: 2,000 × 1,577 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.78 in (25 × 20 mm)1.2 mm236 mm120Vinyl, card and thin sheet
2 × 1.56 in (51 × 40 mm)2.4 mm472 mm30Vinyl, card and thin sheet
3 × 2.34 in (76 × 59 mm)3.7 mm708 mm12Any material, including 3 mm wood and acrylic
4 × 3.12 in (102 × 79 mm)4.9 mm944 mm6Any material, including 3 mm wood and acrylic
6 × 4.68 in (152 × 119 mm)7.3 mm1,416 mm2Any material, including 3 mm wood and acrylic
8 × 6.24 in (203 × 158 mm)9.8 mm1,888 mm1Any material, including 3 mm wood and acrylic
12 × 9.36 in (305 × 238 mm)15 mm2,832 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let It Snow SVG files

← Let It Snow in Kaushan Script All 13 Let It Snow designs Let It Snow in Alfa Slab One →