Let It Snow with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Let It Snow” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 89 mm (3.94 × 3.52 in), scales to any size |
|---|---|
| Pieces | 9 separate pieces |
| Outlines to cut | 16: 9 outer edges and 7 cut-outs |
| Cut length | 1,892 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 491 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,794 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.89 in (25 × 23 mm) | 0.48 mm | 481 mm | 110 | Too fine for most machines |
| 2 × 1.79 in (51 × 45 mm) | 0.97 mm | 961 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.68 in (76 × 68 mm) | 1.4 mm | 1,442 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.57 in (102 × 91 mm) | 1.9 mm | 1,922 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.36 in (152 × 136 mm) | 2.9 mm | 2,883 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.14 in (203 × 181 mm) | 3.9 mm | 3,845 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.72 in (305 × 272 mm) | 5.8 mm | 5,767 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let It Snow SVG files
-
Let It Snow with a snowflake Solid · 8 pieces
-
Let It Snow in Pacifico Solid · 5 pieces
-
Let It Snow in Lobster Solid · 6 pieces
-
Let It Snow in Kaushan Script Solid · 9 pieces
-
Let It Snow in Lilita One Solid · 9 pieces
-
Let It Snow in Alfa Slab One Solid · 9 pieces
-
Let It Snow in Amatic SC Solid · 9 pieces
-
Let It Snow in block capitals Solid · 9 pieces
← Let It Snow stencil plate All 13 Let It Snow designs Let It Snow with a snowflake →