Free Let It Snow SVG

Let It Snow in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Let It Snow in Lobster, as a solid black shape
Let It Snow in Lobster. The preview is the SVG file itself.

“Let It Snow” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size97 × 100 mm (3.81 × 3.94 in), scales to any size
Pieces6 separate pieces
Outlines to cut8: 6 outer edges and 2 cut-outs
Cut length1,163 mm at this size
Narrowest part1.8 mm at this size
Nodes206 curve and line segments

Measured from the file. PNG: 1,940 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)0.46 mm295 mm100Too fine for most machines
1.94 × 2 in (49 × 51 mm)0.91 mm591 mm25Fine detail: vinyl and paper only, weed with care
2.91 × 3 in (74 × 76 mm)1.4 mm886 mm9Vinyl, card and thin sheet
3.88 × 4 in (98 × 102 mm)1.8 mm1,182 mm4Vinyl, card and thin sheet
5.81 × 6 in (148 × 152 mm)2.7 mm1,772 mm2Vinyl, card and thin sheet
7.75 × 8 in (197 × 203 mm)3.7 mm2,363 mm1Any material, including 3 mm wood and acrylic
11.63 × 12 in (295 × 305 mm)5.5 mm3,545 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let It Snow SVG files

← Let It Snow in Pacifico All 13 Let It Snow designs Let It Snow in Kaushan Script →