Free Let It Snow SVG

Let It Snow outline lettering SVG

Let It Snow outline lettering, drawn as a line — Let It Snow outline lettering. The preview is the SVG file itself.

“Let It Snow” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 2.97 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	22: 11 outer edges and 11 cut-outs
Cut length	1,684 mm at this size
Narrowest part	1.4 mm at this size
Nodes	372 curve and line segments

Measured from the file. PNG: 2,000 × 1,529 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.36 mm	428 mm	120	Too fine for most machines
2 × 1.51 in (51 × 38 mm)	0.71 mm	855 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.26 in (76 × 58 mm)	1.1 mm	1,283 mm	12	Vinyl, card and thin sheet
4 × 3.02 in (102 × 77 mm)	1.4 mm	1,711 mm	6	Vinyl, card and thin sheet
6 × 4.53 in (152 × 115 mm)	2.1 mm	2,566 mm	2	Vinyl, card and thin sheet
8 × 6.04 in (203 × 153 mm)	2.8 mm	3,422 mm	1	Vinyl, card and thin sheet
12 × 9.06 in (305 × 230 mm)	4.3 mm	5,133 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let It Snow SVG files

← Let It Snow with stars All 12 Let It Snow designs Let It Snow stencil plate →