Let It Snow in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Let It Snow” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 68 mm (3.94 × 2.68 in), scales to any size |
|---|---|
| Pieces | 9 separate pieces |
| Outlines to cut | 11: 9 outer edges and 2 cut-outs |
| Cut length | 939 mm at this size |
| Narrowest part | 3.6 mm at this size |
| Nodes | 167 curve and line segments |
Measured from the file. PNG: 2,000 × 1,385 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.68 in (25 × 17 mm) | 0.91 mm | 239 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.36 in (51 × 35 mm) | 1.8 mm | 477 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.04 in (76 × 52 mm) | 2.7 mm | 716 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.72 in (102 × 69 mm) | 3.7 mm | 954 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 4.08 in (152 × 104 mm) | 5.5 mm | 1,431 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.44 in (203 × 138 mm) | 7.3 mm | 1,908 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.16 in (305 × 207 mm) | 11 mm | 2,862 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let It Snow SVG files
-
Let It Snow in Amatic SC Solid · 9 pieces
-
Let It Snow in block capitals Solid · 9 pieces
-
Let It Snow in script and capitals Solid · 7 pieces
-
Let It Snow with stars Solid · 12 pieces
-
Let It Snow outline lettering Outline · 11 pieces
-
Let It Snow stencil plate Solid · one piece
-
Let It Snow with a drop shadow Layered · 9 pieces
-
Let It Snow with a snowflake Solid · 8 pieces
← Let It Snow in Lilita One All 13 Let It Snow designs Let It Snow in Amatic SC →