Free Let It Snow SVG

Let It Snow in script and capitals SVG

Let It Snow in script and capitals, as a solid black shape — Let It Snow in script and capitals. The preview is the SVG file itself.

“Let It” in Pacifico script over “SNOW” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 80 mm (3.94 × 3.15 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	11: 7 outer edges and 4 cut-outs
Cut length	1,440 mm at this size
Narrowest part	2.4 mm at this size
Nodes	227 curve and line segments

Measured from the file. PNG: 2,000 × 1,615 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.8 in (25 × 20 mm)	0.61 mm	366 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.6 in (51 × 41 mm)	1.2 mm	732 mm	30	Vinyl, card and thin sheet
3 × 2.4 in (76 × 61 mm)	1.8 mm	1,097 mm	12	Vinyl, card and thin sheet
4 × 3.2 in (102 × 81 mm)	2.4 mm	1,463 mm	6	Vinyl, card and thin sheet
6 × 4.8 in (152 × 122 mm)	3.7 mm	2,195 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.4 in (203 × 163 mm)	4.9 mm	2,926 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.6 in (305 × 244 mm)	7.3 mm	4,389 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let It Snow SVG files

← Let It Snow in block capitals All 12 Let It Snow designs Let It Snow with stars →