Leprechaun face outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The face as a line drawing: the edge of the hat, the ears and the curls of the beard as one even line, with the band, the buckle, the eyes under the brim, the nose, the moustache and the smile inside it. For colouring sheets and pen plotters.
What is in the file
| Size | 73 × 100 mm (2.87 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 18: 1 outer edge and 17 cut-outs |
| Cut length | 1,360 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 305 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,479 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.73 × 1 in (19 × 25 mm) | 0.46 mm | 345 mm | 130 | Too fine for most machines |
| 1.46 × 2 in (37 × 51 mm) | 0.91 mm | 691 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 2.19 × 3 in (56 × 76 mm) | 1.4 mm | 1,036 mm | 15 | Vinyl, card and thin sheet |
| 2.92 × 4 in (74 × 102 mm) | 1.8 mm | 1,382 mm | 6 | Vinyl, card and thin sheet |
| 4.37 × 6 in (111 × 152 mm) | 2.7 mm | 2,073 mm | 2 | Vinyl, card and thin sheet |
| 5.83 × 8 in (148 × 203 mm) | 3.7 mm | 2,764 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.75 × 12 in (222 × 305 mm) | 5.5 mm | 4,145 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More leprechaun SVG files
-
Layered leprechaun face in six colours Layered · 14 pieces -
Leprechaun face with a buckled hat Solid · one piece -
Leprechaun hat with a square buckle Solid · one piece -
Leprechaun silhouette standing Solid · one piece -
Leprechaun standing in a belted coat Solid · one piece -
Dabbing leprechaun Solid · one piece -
Leprechaun gnome with the hat over his eyes Solid · one piece -
Leprechaun peeping over a wall Solid · one piece
← Leprechaun frame with a blank face All 13 leprechauns Layered leprechaun face in six colours →