Leprechaun frame with a blank face SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A ring with the buckled hat on top and a beard of eleven curls round its lower half, so the round opening stands in for the face. One piece, the same on both sides. The opening is 47 mm across at 100 mm tall, for an initial, a name or a photo.
What is in the file
| Size | 77 × 100 mm (3.05 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 619 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 76 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,565 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.77 × 1 in (20 × 25 mm) | 0.97 mm | 157 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.55 × 2 in (39 × 51 mm) | 1.9 mm | 314 mm | 30 | Vinyl, card and thin sheet |
| 2.32 × 3 in (59 × 76 mm) | 2.9 mm | 472 mm | 12 | Vinyl, card and thin sheet |
| 3.1 × 4 in (79 × 102 mm) | 3.9 mm | 629 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.64 × 6 in (118 × 152 mm) | 5.8 mm | 943 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.19 × 8 in (157 × 203 mm) | 7.7 mm | 1,258 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.29 × 12 in (236 × 305 mm) | 12 mm | 1,887 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More leprechaun SVG files
-
Leprechaun face outline Outline · one piece -
Layered leprechaun face in six colours Layered · 14 pieces -
Leprechaun face with a buckled hat Solid · one piece -
Leprechaun hat with a square buckle Solid · one piece -
Leprechaun silhouette standing Solid · one piece -
Leprechaun standing in a belted coat Solid · one piece -
Dabbing leprechaun Solid · one piece -
Leprechaun gnome with the hat over his eyes Solid · one piece
← Leprechaun footprint stencil All 13 leprechauns Leprechaun face outline →