Leprechaun silhouette standing SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The whole figure as one solid shape on a strip of ground: the hat, the ears, the beard, a coat with both arms held out, two legs and two shoes. One piece with a flat base, for a shadow box or the edge of a shelf.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 62 × 100 mm (2.44 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 505 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 81 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,271 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.62 × 1 in (16 × 25 mm) | Over 1.5 mm | 128 mm | 140 | Vinyl, card and thin sheet |
| 1.24 × 2 in (32 × 51 mm) | Over 3 mm | 257 mm | 40 | Any material, including 3 mm wood and acrylic |
| 1.86 × 3 in (47 × 76 mm) | Over 4.6 mm | 385 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.48 × 4 in (63 × 102 mm) | Over 6.1 mm | 513 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.73 × 6 in (95 × 152 mm) | Over 9.1 mm | 770 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.97 × 8 in (126 × 203 mm) | Over 12 mm | 1,026 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.45 × 12 in (189 × 305 mm) | Over 18 mm | 1,539 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More leprechaun SVG files
-
Leprechaun standing in a belted coat Solid · one piece -
Dabbing leprechaun Solid · one piece -
Leprechaun gnome with the hat over his eyes Solid · one piece -
Leprechaun peeping over a wall Solid · one piece -
Leprechaun shoe with a curled toe Solid · one piece -
Leprechaun legs in striped stockings Solid · one piece -
Leprechaun footprint stencil Solid · one piece -
Leprechaun frame with a blank face Solid · one piece
← Leprechaun hat with a square buckle All 13 leprechauns Leprechaun standing in a belted coat →