Leprechaun hat with a square buckle SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The hat on its own: a crown that widens towards the top, a curved brim and a band cut as a window each side of a square buckle. One piece, the same on both sides, for hat toppers, party invitations and the corner of a card.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.42 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 475 mm at this size |
| Narrowest part | 5.6 mm at this size |
| Nodes | 41 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,258 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 16 mm) | 1.4 mm | 121 mm | 140 | Vinyl, card and thin sheet |
| 2 × 1.23 in (51 × 31 mm) | 2.8 mm | 241 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.84 in (76 × 47 mm) | 4.3 mm | 362 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.46 in (102 × 62 mm) | 5.7 mm | 483 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.68 in (152 × 94 mm) | 8.5 mm | 724 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.91 in (203 × 125 mm) | 11 mm | 965 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.37 in (305 × 187 mm) | 17 mm | 1,448 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More leprechaun SVG files
-
Leprechaun silhouette standing Solid · one piece -
Leprechaun standing in a belted coat Solid · one piece -
Dabbing leprechaun Solid · one piece -
Leprechaun gnome with the hat over his eyes Solid · one piece -
Leprechaun peeping over a wall Solid · one piece -
Leprechaun shoe with a curled toe Solid · one piece -
Leprechaun legs in striped stockings Solid · one piece -
Leprechaun footprint stencil Solid · one piece
← Leprechaun face with a buckled hat All 13 leprechauns Leprechaun silhouette standing →