Leprechaun peeping over a wall SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A leprechaun looking over the top of a wall: the hat, two eyes, a round nose resting on the edge, tufts of hair at each ear and four fingers of each hand hooked over. One piece with a flat base, for the top of a sign or a door frame.
What is in the file
| Size | 100 × 92 mm (3.94 × 3.61 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 17: 1 outer edge and 16 cut-outs |
| Cut length | 941 mm at this size |
| Narrowest part | 4.2 mm at this size |
| Nodes | 139 curve and line segments |
Measured from the file. PNG: 2,000 × 1,838 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.92 in (25 × 23 mm) | 1.1 mm | 239 mm | 100 | Vinyl, card and thin sheet |
| 2 × 1.83 in (51 × 47 mm) | 2.1 mm | 478 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.75 in (76 × 70 mm) | 3.2 mm | 717 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.66 in (102 × 93 mm) | 4.3 mm | 956 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.5 in (152 × 140 mm) | 6.4 mm | 1,434 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.33 in (203 × 186 mm) | 8.5 mm | 1,912 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.99 in (305 × 279 mm) | 13 mm | 2,868 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More leprechaun SVG files
-
Leprechaun shoe with a curled toe Solid · one piece -
Leprechaun legs in striped stockings Solid · one piece -
Leprechaun footprint stencil Solid · one piece -
Leprechaun frame with a blank face Solid · one piece -
Leprechaun face outline Outline · one piece -
Layered leprechaun face in six colours Layered · 14 pieces -
Leprechaun face with a buckled hat Solid · one piece -
Leprechaun hat with a square buckle Solid · one piece
← Leprechaun gnome with the hat over his eyes All 13 leprechauns Leprechaun shoe with a curled toe →