Leprechaun face with a buckled hat SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
His face from the front: a tall hat with a square buckle, two eyes in the shade of the brim, a round nose on a curled moustache, a smile and a beard of eleven round curls. The skin is cut away. One piece, the same on both sides.
What is in the file
| Size | 73 × 100 mm (2.87 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 676 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 112 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,479 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.73 × 1 in (19 × 25 mm) | 0.79 mm | 172 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 1.46 × 2 in (37 × 51 mm) | 1.6 mm | 343 mm | 35 | Vinyl, card and thin sheet |
| 2.19 × 3 in (56 × 76 mm) | 2.4 mm | 515 mm | 15 | Vinyl, card and thin sheet |
| 2.92 × 4 in (74 × 102 mm) | 3.1 mm | 687 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.37 × 6 in (111 × 152 mm) | 4.7 mm | 1,030 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.83 × 8 in (148 × 203 mm) | 6.3 mm | 1,374 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.75 × 12 in (222 × 305 mm) | 9.4 mm | 2,060 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More leprechaun SVG files
-
Leprechaun hat with a square buckle Solid · one piece -
Leprechaun silhouette standing Solid · one piece -
Leprechaun standing in a belted coat Solid · one piece -
Dabbing leprechaun Solid · one piece -
Leprechaun gnome with the hat over his eyes Solid · one piece -
Leprechaun peeping over a wall Solid · one piece -
Leprechaun shoe with a curled toe Solid · one piece -
Leprechaun legs in striped stockings Solid · one piece
← Layered leprechaun face in six colours All 13 leprechauns Leprechaun hat with a square buckle →