Layered leprechaun face in six colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Six layers to stack: an orange beard that carries the whole shape, a skin layer with the moustache cut out of it, a green hat, a black band with the eyes and the smile, a gold buckle and a pink nose.
What is in the file
| Size | 73 × 100 mm (2.87 × 3.94 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 17: 14 outer edges and 3 cut-outs |
| Cut length | 1,132 mm at this size |
| Narrowest part | 5.7 mm at this size |
| Nodes | 169 curve and line segments |
| Layers | 6: beard, skin, hat, band, eyes and smile, buckle and nose |
Measured from the file. PNG: 1,479 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.73 × 1 in (19 × 25 mm) | 1.4 mm | 288 mm | 130 | Vinyl, card and thin sheet |
| 1.46 × 2 in (37 × 51 mm) | 2.9 mm | 575 mm | 35 | Vinyl, card and thin sheet |
| 2.19 × 3 in (56 × 76 mm) | 4.3 mm | 863 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.92 × 4 in (74 × 102 mm) | 5.8 mm | 1,150 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.37 × 6 in (111 × 152 mm) | 8.7 mm | 1,725 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.83 × 8 in (148 × 203 mm) | 12 mm | 2,300 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.75 × 12 in (222 × 305 mm) | 17 mm | 3,450 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More leprechaun SVG files
-
Leprechaun face with a buckled hat Solid · one piece -
Leprechaun hat with a square buckle Solid · one piece -
Leprechaun silhouette standing Solid · one piece -
Leprechaun standing in a belted coat Solid · one piece -
Dabbing leprechaun Solid · one piece -
Leprechaun gnome with the hat over his eyes Solid · one piece -
Leprechaun peeping over a wall Solid · one piece -
Leprechaun shoe with a curled toe Solid · one piece
← Leprechaun face outline All 13 leprechauns Leprechaun face with a buckled hat →