Leaf earrings, a mirrored pair SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Loose pieces: two long leaves hanging tip down, with cut-out veins and a hole at the top of each, mirrored left and right. Scale to half size for earrings 50 mm long.
What is in the file
| Size | 88 × 100 mm (3.46 × 3.94 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 26: 2 outer edges and 24 cut-outs |
| Cut length | 1,443 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 220 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,769 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.88 × 1 in (22 × 25 mm) | 0.28 mm | 367 mm | 110 | Too fine for most machines |
| 1.76 × 2 in (45 × 51 mm) | 0.56 mm | 733 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.64 × 3 in (67 × 76 mm) | 0.84 mm | 1,100 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 3.52 × 4 in (89 × 102 mm) | 1.1 mm | 1,466 mm | 6 | Vinyl, card and thin sheet |
| 5.28 × 6 in (134 × 152 mm) | 1.7 mm | 2,199 mm | 2 | Vinyl, card and thin sheet |
| 7.04 × 8 in (179 × 203 mm) | 2.2 mm | 2,932 mm | 1 | Vinyl, card and thin sheet |
| 10.56 × 12 in (268 × 305 mm) | 3.4 mm | 4,398 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More leaf SVG files
-
Leaf template in three sizes Solid · 3 pieces
-
Leaf border Solid · one piece
-
Simple leaf with veins Solid · one piece
-
Serrated leaf with straight veins Solid · one piece
-
Oak leaf with round lobes Solid · one piece
-
Maple leaf with five veins Solid · one piece
-
Monstera leaf with splits and holes Solid · one piece
-
Fern frond with fifteen pairs of leaflets Solid · one piece
← Three falling autumn leaves All 26 leaves Leaf template in three sizes →