Free leaf SVG

Fern frond with fifteen pairs of leaflets SVG

Fern frond with fifteen pairs of leaflets, as a solid black shape
Fern frond with fifteen pairs of leaflets. The preview is the SVG file itself.

A straight frond with fifteen pairs of slim leaflets, longest low down and shrinking to the tip. Each leaflet joins the stalk with its full width.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size53 × 100 mm (2.07 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length1,141 mm at this size
Narrowest part1.7 mm at this size
Nodes233 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,087 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.53 × 1 in (13 × 25 mm)0.43 mm290 mm160Too fine for most machines
1.05 × 2 in (27 × 51 mm)0.86 mm580 mm45Fine detail: vinyl and paper only, weed with care
1.58 × 3 in (40 × 76 mm)1.3 mm869 mm18Vinyl, card and thin sheet
2.1 × 4 in (53 × 102 mm)1.7 mm1,159 mm10Vinyl, card and thin sheet
3.15 × 6 in (80 × 152 mm)2.6 mm1,739 mm3Vinyl, card and thin sheet
4.2 × 8 in (107 × 203 mm)3.5 mm2,319 mm2Any material, including 3 mm wood and acrylic
6.3 × 12 in (160 × 305 mm)5.2 mm3,478 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leaf SVG files

← Monstera leaf with splits and holes All 26 leaves Fern leaf with scalloped leaflets →