Free leaf SVG

Fern leaf with scalloped leaflets SVG

Fern leaf with scalloped leaflets, as a solid black shape
Fern leaf with scalloped leaflets. The preview is the SVG file itself.

Ten pairs of broader leaflets with scalloped edges, for the look of a woodland fern. Bolder than the slim frond, so it suits smaller sizes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size60 × 100 mm (2.35 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length1,021 mm at this size
Narrowest part1.7 mm at this size
Nodes651 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,227 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.6 × 1 in (15 × 25 mm)0.43 mm259 mm150Too fine for most machines
1.2 × 2 in (30 × 51 mm)0.86 mm519 mm40Fine detail: vinyl and paper only, weed with care
1.79 × 3 in (46 × 76 mm)1.3 mm778 mm18Vinyl, card and thin sheet
2.39 × 4 in (61 × 102 mm)1.7 mm1,037 mm8Vinyl, card and thin sheet
3.59 × 6 in (91 × 152 mm)2.6 mm1,556 mm3Vinyl, card and thin sheet
4.78 × 8 in (122 × 203 mm)3.5 mm2,075 mm2Any material, including 3 mm wood and acrylic
7.18 × 12 in (182 × 305 mm)5.2 mm3,112 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leaf SVG files

← Fern frond with fifteen pairs of leaflets All 26 leaves Palm leaf with long leaflets →