Free leaf SVG

Curved leaf branch SVG

Curved leaf branch, as a solid black shape — Curved leaf branch. The preview is the SVG file itself.

A branch that bends in an arc with leaves on both sides, all leaning towards the tip. Fits under a name or along the edge of a round sign.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 41 mm (3.94 × 1.63 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	772 mm at this size
Narrowest part	1.5 mm at this size
Nodes	199 curve and line segments

Measured from the file. PNG: 2,000 × 873 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.41 in (25 × 11 mm)	0.38 mm	196 mm	190	Too fine for most machines
2 × 0.83 in (51 × 21 mm)	0.76 mm	392 mm	55	Fine detail: vinyl and paper only, weed with care
3 × 1.24 in (76 × 32 mm)	1.1 mm	588 mm	24	Vinyl, card and thin sheet
4 × 1.66 in (102 × 42 mm)	1.5 mm	784 mm	12	Vinyl, card and thin sheet
6 × 2.48 in (152 × 63 mm)	2.3 mm	1,177 mm	4	Vinyl, card and thin sheet
8 × 3.31 in (203 × 84 mm)	3 mm	1,569 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.97 in (305 × 126 mm)	4.6 mm	2,353 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leaf SVG files

← Leaf branch with seven leaves All 26 leaves Laurel branch →