Free leaf SVG

Laurel branch SVG

Laurel branch, as a solid black shape
Laurel branch. The preview is the SVG file itself.

One half of a laurel wreath: pointed leaves in pairs up a curved stem, with a single leaf at the tip. Mirror it to make the full wreath.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size53 × 100 mm (2.07 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length812 mm at this size
Narrowest part1.6 mm at this size
Nodes185 curve and line segments

Measured from the file. PNG: 1,088 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.53 × 1 in (13 × 25 mm)0.41 mm206 mm160Too fine for most machines
1.05 × 2 in (27 × 51 mm)0.81 mm412 mm45Fine detail: vinyl and paper only, weed with care
1.58 × 3 in (40 × 76 mm)1.2 mm619 mm18Vinyl, card and thin sheet
2.1 × 4 in (53 × 102 mm)1.6 mm825 mm10Vinyl, card and thin sheet
3.16 × 6 in (80 × 152 mm)2.4 mm1,237 mm3Vinyl, card and thin sheet
4.21 × 8 in (107 × 203 mm)3.3 mm1,650 mm2Any material, including 3 mm wood and acrylic
6.31 × 12 in (160 × 305 mm)4.9 mm2,475 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leaf SVG files

← Curved leaf branch All 26 leaves Olive branch with fruit →