Free leaf SVG

Three falling autumn leaves SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three falling autumn leaves, as a solid black shape
Three falling autumn leaves. The preview is the SVG file itself.

Loose pieces: a maple, an oak and a serrated leaf, each with its veins, tumbling at different angles. Cut each in its own autumn colour.

What is in the file

Size96 × 100 mm (3.79 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut38: 3 outer edges and 35 cut-outs
Cut length1,382 mm at this size
Narrowest part1 mm at this size
Nodes599 curve and line segments
Also found asFall leaves SVG

Measured from the file. PNG: 1,929 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.25 mm351 mm100Too fine for most machines
1.93 × 2 in (49 × 51 mm)0.51 mm702 mm25Fine detail: vinyl and paper only, weed with care
2.89 × 3 in (73 × 76 mm)0.76 mm1,053 mm9Fine detail: vinyl and paper only, weed with care
3.85 × 4 in (98 × 102 mm)1 mm1,404 mm6Vinyl, card and thin sheet
5.78 × 6 in (147 × 152 mm)1.5 mm2,106 mm2Vinyl, card and thin sheet
7.7 × 8 in (196 × 203 mm)2 mm2,808 mm1Vinyl, card and thin sheet
11.56 × 12 in (294 × 305 mm)3 mm4,212 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leaf SVG files

← Six leaves on one sheet All 26 leaves Leaf earrings, a mirrored pair →