Free leaf SVG

Serrated leaf with straight veins SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Serrated leaf with straight veins, as a solid black shape
Serrated leaf with straight veins. The preview is the SVG file itself.

A saw-toothed leaf like beech, elm or birch, with eight pairs of straight veins. The veins stop short of the midrib, which makes it sturdier than it looks.

What is in the file

Size55 × 100 mm (2.16 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut18: 1 outer edge and 17 cut-outs
Cut length1,158 mm at this size
Narrowest part1 mm at this size
Nodes288 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,131 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.55 × 1 in (14 × 25 mm)0.25 mm294 mm160Too fine for most machines
1.1 × 2 in (28 × 51 mm)0.51 mm588 mm45Fine detail: vinyl and paper only, weed with care
1.64 × 3 in (42 × 76 mm)0.76 mm882 mm18Fine detail: vinyl and paper only, weed with care
2.19 × 4 in (56 × 102 mm)1 mm1,177 mm10Vinyl, card and thin sheet
3.29 × 6 in (84 × 152 mm)1.5 mm1,765 mm3Vinyl, card and thin sheet
4.38 × 8 in (111 × 203 mm)2 mm2,353 mm2Vinyl, card and thin sheet
6.58 × 12 in (167 × 305 mm)3 mm3,530 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leaf SVG files

← Simple leaf with veins All 26 leaves Oak leaf with round lobes →