Free leaf SVG

Oak leaf with round lobes SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Oak leaf with round lobes, as a solid black shape
Oak leaf with round lobes. The preview is the SVG file itself.

Four pairs of round lobes and one at the tip, with a vein cut into each lobe. The outline alone says oak, so it still reads when cut small.

What is in the file

Size50 × 100 mm (1.97 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length752 mm at this size
Narrowest part1 mm at this size
Nodes168 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,038 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.5 × 1 in (13 × 25 mm)0.25 mm191 mm170Too fine for most machines
1 × 2 in (25 × 51 mm)0.51 mm382 mm50Fine detail: vinyl and paper only, weed with care
1.5 × 3 in (38 × 76 mm)0.76 mm573 mm21Fine detail: vinyl and paper only, weed with care
2 × 4 in (51 × 102 mm)1 mm764 mm10Vinyl, card and thin sheet
3 × 6 in (76 × 152 mm)1.5 mm1,146 mm3Vinyl, card and thin sheet
4 × 8 in (102 × 203 mm)2 mm1,528 mm2Vinyl, card and thin sheet
6 × 12 in (152 × 305 mm)3 mm2,292 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leaf SVG files

← Serrated leaf with straight veins All 26 leaves Maple leaf with five veins →