Free leaf SVG

Leaf icon with stalk SVG

Leaf icon with stalk, as a solid black shape
Leaf icon with stalk. The preview is the SVG file itself.

A single leaf tilted to one side, with one slit for the midrib and a short straight stalk. The plain sign for leaf, plant or eco.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size92 × 100 mm (3.61 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length460 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes23 curve and line segments

Measured from the file. PNG: 1,838 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)Over 1.5 mm117 mm100Vinyl, card and thin sheet
1.83 × 2 in (47 × 51 mm)Over 3 mm234 mm30Any material, including 3 mm wood and acrylic
2.75 × 3 in (70 × 76 mm)Over 4.6 mm351 mm12Any material, including 3 mm wood and acrylic
3.66 × 4 in (93 × 102 mm)Over 6.1 mm467 mm6Any material, including 3 mm wood and acrylic
5.5 × 6 in (140 × 152 mm)Over 9.1 mm701 mm2Any material, including 3 mm wood and acrylic
7.33 × 8 in (186 × 203 mm)Over 12 mm935 mm1Any material, including 3 mm wood and acrylic
10.99 × 12 in (279 × 305 mm)Over 18 mm1,402 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leaf SVG files

← Heart-shaped leaf All 26 leaves Leaf branch with seven leaves →