Free ladder SVG

Layered step ladder in four colours SVG

Layered step ladder in four colours, in layered colours
Layered step ladder in four colours. The preview is the SVG file itself.

Four layers to stack: a red step ladder, yellow treads and top cap, a grey paint can on top and blue paint for its rim and the run down its side. Cut each from its own colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size57 × 100 mm (2.25 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut15: 8 outer edges and 7 cut-outs
Cut length1,146 mm at this size
Narrowest part3.6 mm at this size
Nodes155 curve and line segments
Layers4: frame, treads and cap, paint can and paint

Measured from the file. PNG: 1,175 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.57 × 1 in (15 × 25 mm)0.91 mm291 mm150Fine detail: vinyl and paper only, weed with care
1.14 × 2 in (29 × 51 mm)1.8 mm582 mm45Vinyl, card and thin sheet
1.71 × 3 in (44 × 76 mm)2.7 mm873 mm18Vinyl, card and thin sheet
2.28 × 4 in (58 × 102 mm)3.7 mm1,164 mm8Any material, including 3 mm wood and acrylic
3.43 × 6 in (87 × 152 mm)5.5 mm1,747 mm3Any material, including 3 mm wood and acrylic
4.57 × 8 in (116 × 203 mm)7.3 mm2,329 mm2Any material, including 3 mm wood and acrylic
6.85 × 12 in (174 × 305 mm)11 mm3,493 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ladder SVG files

← Ladder outline All 13 ladders Wooden ladder →