Free ladder SVG

Rope ladder on a branch SVG

Rope ladder on a branch, as a solid black shape — Rope ladder on a branch. The preview is the SVG file itself.

A rope ladder hanging from a leafy branch: two ropes that sway a little, five round wooden rungs with a knot under each end and a loop over the branch for each rope.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	83 × 100 mm (3.25 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	765 mm at this size
Narrowest part	2.2 mm at this size
Nodes	155 curve and line segments

Measured from the file. PNG: 1,663 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.83 × 1 in (21 × 25 mm)	0.56 mm	194 mm	110	Fine detail: vinyl and paper only, weed with care
1.65 × 2 in (42 × 51 mm)	1.1 mm	389 mm	30	Vinyl, card and thin sheet
2.48 × 3 in (63 × 76 mm)	1.7 mm	583 mm	12	Vinyl, card and thin sheet
3.3 × 4 in (84 × 102 mm)	2.2 mm	777 mm	6	Vinyl, card and thin sheet
4.95 × 6 in (126 × 152 mm)	3.4 mm	1,166 mm	2	Any material, including 3 mm wood and acrylic
6.6 × 8 in (168 × 203 mm)	4.5 mm	1,554 mm	1	Any material, including 3 mm wood and acrylic
9.9 × 12 in (251 × 305 mm)	6.7 mm	2,332 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ladder SVG files

← Fire ladder with roof hooks All 13 ladders Ladder in an apple tree →