Free ladder SVG

Wooden ladder SVG

Wooden ladder, as a solid black shape
Wooden ladder. The preview is the SVG file itself.

A plain wooden ladder set on a slant: two rails with rounded tops and eight rungs whose ends show through the rails, as on a ladder pegged together by hand.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size52 × 100 mm (2.04 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length691 mm at this size
Narrowest part3 mm at this size
Nodes132 curve and line segments

Measured from the file. PNG: 1,075 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.52 × 1 in (13 × 25 mm)0.76 mm176 mm160Fine detail: vinyl and paper only, weed with care
1.04 × 2 in (26 × 51 mm)1.5 mm351 mm45Vinyl, card and thin sheet
1.56 × 3 in (40 × 76 mm)2.3 mm527 mm18Vinyl, card and thin sheet
2.08 × 4 in (53 × 102 mm)3 mm702 mm10Any material, including 3 mm wood and acrylic
3.11 × 6 in (79 × 152 mm)4.6 mm1,053 mm3Any material, including 3 mm wood and acrylic
4.15 × 8 in (105 × 203 mm)6.1 mm1,404 mm2Any material, including 3 mm wood and acrylic
6.23 × 12 in (158 × 305 mm)9.1 mm2,106 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ladder SVG files

← Layered step ladder in four colours All 13 ladders Step ladder silhouette →