Free ladder SVG

Ladder against a brick wall SVG

Ladder against a brick wall, as a solid black shape
Ladder against a brick wall. The preview is the SVG file itself.

A wooden ladder leaning on a brick wall, with the courses of brick marked by lines that stop short. Wall and ladder stand on one strip of ground, and the ladder rests on the top of the wall.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size96 × 100 mm (3.77 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut31: 1 outer edge and 30 cut-outs
Cut length1,593 mm at this size
Narrowest part2.3 mm at this size
Nodes282 curve and line segments

Measured from the file. PNG: 1,919 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.58 mm405 mm100Fine detail: vinyl and paper only, weed with care
1.92 × 2 in (49 × 51 mm)1.2 mm809 mm25Vinyl, card and thin sheet
2.87 × 3 in (73 × 76 mm)1.8 mm1,214 mm9Vinyl, card and thin sheet
3.83 × 4 in (97 × 102 mm)2.3 mm1,618 mm6Vinyl, card and thin sheet
5.75 × 6 in (146 × 152 mm)3.5 mm2,428 mm2Any material, including 3 mm wood and acrylic
7.66 × 8 in (195 × 203 mm)4.7 mm3,237 mm1Any material, including 3 mm wood and acrylic
11.5 × 12 in (292 × 305 mm)7 mm4,855 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ladder SVG files

← Step ladder with a paint can All 13 ladders Fire ladder with roof hooks →